新闻

Installation and maintenance

Update:22-02-2020
Summary:

Points to note From the perspective of use, to ensure t […]

Points to note From the perspective of use, to ensure that the bearings can work reliably, pay attention to the following points: 1. Improve lubrication quality, control oil pressure, temperature and flow, and strengthen oil filtration. 2. Use fuel and lubricating oil that meet the requirements. 3. It is unfavorable to control the temperature status of diesel generators and work under super-cooling and over-heating conditions. On cold days, the diesel engine should be warmed up before starting, and the crankshaft should be turned by hand to allow the oil to enter the friction surface. 4.

The surface quality and geometry of bearings and journals should be strictly guaranteed. 5. The bearing clearance should be appropriate. If the generator set is too large, it will cause an impact. If it is too small, it will cause poor lubrication and may burn the tiles. How to ensure the reliable operation of bearings Generally speaking, from the perspective of use, pay attention to the following points: 1.

The bearing clearance should be appropriate, if it is too large, it will cause impact, if it is too small, it will cause poor lubrication and may burn the bushes; 2. The surface quality and geometry of bearings and journals should be strictly guaranteed; 3. Improve lubrication quality, control oil pressure, temperature and flow, and strengthen oil filtration; 机 4. Use qualified fuel and lubricating oil. In order to make the bearing fully perform and maintain its proper performance for a long period of time, regular maintenance (regular inspection) must be properly done. Through proper periodic inspections, early detection of failures and prevention of accidents are important to improve productivity and economy.

wheel unit bearing

0
Views: 636