Information centres

  • What are the possible problems with the appearance of the bearing? (1)

    What are the possible problems with the appearance of the bearing? (1)

    When using the bearing, we must first check the appearance of the bearing to infer whether it meets the criteria we require. The bearing inspection should be carried out under astigmatism light, carefully observe the bearing surface, cracks and other parts. 1. Various cracks Such as raw material cra... read more

    Aug 17,2020 News
  • How to adjust the bearing axial clearance?

    How to adjust the bearing axial clearance?

    The axial clearance inside the bearing can be achieved by moving the axial position of the outer ring. Adjusting shim method Fill a set of soft material (soft steel or elastic paper) gaskets between the bearing end cover and the end surface of the bearing seat; when adjusting, first install the bear... read more

    Aug 11,2020 News
  • How to install the bearing correctly?

    How to install the bearing correctly?

    Whether the bearing is installed correctly affects the accuracy, life and performance. Therefore, the design and assembly department must fully study the bearing installation. Hope to install in accordance with operating standards. The standard work items are usually as follows: (1) Clean the bearin... read more

    Aug 04,2020 News
  • What should be paid attention to when the wheel bearing is removed for cleaning?

    What should be paid attention to when the wheel bearing is removed for cleaning?

    1. Avoid directly hitting the bearing ring 2. The disassembly force should not be transmitted through the body 3. Once the wheel bearing is disassembled, it should be cleaned carefully and not with "violent" flames. 4. The assembly site should be kept as clean as possible and free of dust. 5. Avoid ... read more

    Jul 27,2020 News
  • What are the FAG bearing damage status and solutions? (3)

    What are the FAG bearing damage status and solutions? (3)

    1. Creep Damage state: The so-called creep means that when a gap occurs on the mating surface of the FAG bearing, the sliding surface between the mating surfaces exhibits a mirror surface that is bright or dark, and sometimes the page is stuck. Wear occurs. Cause: Insufficient interference or cleara... read more

    Jul 20,2020 News